RO plants, softeners, DM plants, boilers, cooling towers, STPs, ETPs, drinking water and pools. Send us your water report and we will recommend what to use, where to dose it and which pack size suits you.
Every product line has its own page explaining what it does, where it is used and how it is dosed.
7 product linesStop scaling and fouling, clean membranes and condition RO water.
5 product linesFlocculants and coagulants for clarification and sludge dewatering.
3 product linesFast coagulants for drinking water, ETPs and STPs.
View Poly Aluminium Chloride (PAC) & Alum →
3 product linesBiology, disinfection and treatment for sewage and effluent plants.
View ETP & STP Chemicals →
2 product linesKnock down and prevent foam in aeration tanks and process water.
View Defoamers & Antifoam →
6 product linesOxygen scavengers, amines, scale control and descaling.
4 product linesScale, corrosion and algae control for cooling water.
8 product linesOxidising and non-oxidising biocides for water and surfaces.
1 product lineFast, low-residue sanitiser for food, dairy, beverage and water.
View Peracetic Acid →
4 product linesGranular, powdered, pelletised and silver-impregnated carbon.
4 product linesSoftener, DM and mixed bed resins, and regeneration salt.
View Ion Exchange Resins →
5 product linesIron removal, fluoride removal, pH correction and sand filter media.
Shop onlineOur Pool Maxx range, sold online with doses on every label.
Shop pool chemicals →A typical water treatment train, and the chemicals used at each stage. Most plants use only some of these stages.
Removes mud, colour and turbidity from raw water.
Traps particles, iron and manganese; corrects pH and fluoride.
Removes chlorine, odour, taste and organics before RO.
Removes hardness, or all dissolved salts for boilers and process water.
Keeps membranes free of scale, slime and fouling.
Adds back minerals, sets pH and keeps stored water safe.
Common water problems, what usually causes them and what helps. A water test confirms the cause.
| What you see | Usual cause | What helps |
|---|---|---|
| RO output falling, pressure rising | Scale or fouling on membranes | |
| Slime in RO or frequent membrane cleaning | Biofouling | |
| Yellow, red or brown stains; metallic taste | Iron and manganese | |
| White scale on geysers, taps and boilers | Hardness | |
| Cloudy or muddy water | Suspended solids | |
| Chlorine smell, odour or bad taste | Chlorine and organics | |
| High fluoride in borewell water | Natural fluoride | |
| Acidic water, blue-green stains, leaks | Low pH | |
| Pitting in boiler tubes | Dissolved oxygen | |
| Corrosion in condensate lines | Carbon dioxide in steam | |
| Algae and slime in cooling tower | Microbial growth | |
| Foam in aeration tank | Surfactants, process upset | |
| STP smell, high BOD and COD | Weak bacteria | |
| Wet sludge, poor settling | Poor flocculation | |
| Coloured effluent even when COD is in limits | Dissolved dyes | |
| Infection control in hospitals and clinics | Surfaces, instruments and air | |
| Green or cloudy pool | Low chlorine, algae |
Pre-treatment, RO, boiler, cooling, effluent, disinfection and filter media from a single source: one invoice and one contact.
We look at your water report before suggesting products, instead of selling the same product to every plant.
Every product line has a page explaining what it does, where it is used, how it is dosed and what to watch out for.
Manufacturer and supplier, also known for the Pool Maxx swimming pool range.
Water treatment chemicals are products used to make water fit for a purpose: coagulants and flocculants to remove solids, antiscalants and inhibitors to prevent scale and corrosion, biocides and disinfectants to control microbes, and media such as activated carbon and resins to remove specific substances.
RO antiscalants and membrane cleaners, polyelectrolytes and coagulants, poly aluminium chloride and alum, ETP and STP chemicals and bacteria culture, defoamers, boiler and cooling tower chemicals, peracetic acid and other biocides, activated carbon, ion exchange resins, filter media and swimming pool chemicals.
Prices depend on the product, grade and quantity, so we quote on request. Fill in the form or WhatsApp us with the product and quantity you need.
Yes. Send your water or effluent analysis with your plant type and capacity, and we will recommend suitable products and pack sizes.
Yes, we deliver across India.
A coagulant (such as PAC, alum or PolyDADMAC) neutralises the charge on fine particles so they can stick together. A flocculant (such as polyelectrolyte) then bridges them into large flocs that settle or filter out quickly.
Typical RO chemicals are an antiscalant, sodium metabisulphite to remove chlorine, membrane cleaning chemicals, an RO biocide, and post-treatment chemicals such as a pH booster or minerals.
A scale and corrosion inhibitor, a dispersant, and biocides: an oxidising biocide alternated with a non-oxidising one.
Use the quote form on this page, WhatsApp +91 98333 22685 or call +91 87792 40420.
Tell us what you are treating and how much you use. Send your water or effluent analysis if you have one, and we will recommend the right product and pack size.
Recognized by Leading Industry Publications
