Polyelectrolyte Flocculants & Coagulants
Zyax manufactures and supplies polyelectrolyte flocculants (cationic, anionic and non-ionic polyacrylamides) and organic coagulants such as PolyDADMAC and polyamines. They help water and effluent plants settle solids faster, get clearer outlet water and squeeze more water out of sludge.
- Manufacturer & supplier, Mumbai
- Send your water report, get a product recommendation
- Bulk packs, delivered across India
- Range
- Cationic polyelectrolyte, anionic polyelectrolyte, non-ionic flocculant, PolyDADMAC, polyamines
- Forms
- Powder in bags, liquid and emulsion in cans and drums
- Used for
- Clarification, effluent and sewage treatment, sludge thickening and dewatering, paper, textile, mining and sugar
- How we help
- Tell us your plant and sludge type; we suggest the charge type and grade to trial
What is a polyelectrolyte?
A polyelectrolyte is a long-chain, water-soluble polymer that carries an electric charge. In water treatment the most common polyelectrolytes are polyacrylamides. Their long chains bridge fine particles together into large, heavy flocs that settle or float quickly, or that release water easily in a filter press, belt press, screw press or centrifuge.
Polyelectrolytes are usually used after a coagulant. The coagulant (such as PAC or alum, or an organic coagulant like PolyDADMAC) neutralises the charge on tiny particles; the polyelectrolyte then gathers them into big flocs.
Polyelectrolyte: quick facts
| What it is | A water-soluble polymer carrying electric charges; most flocculant grades are polyacrylamide based |
|---|---|
| Polyacrylamide formula | (C3H5NO)n |
| Types | Cationic (positive charge), anionic (negative charge) and non-ionic |
| Forms | White granular powder, liquid and emulsion |
| CAS number | 9003-05-8 (polyacrylamide) |
| Main uses | Flocculating suspended solids, sludge thickening and dewatering, paper, mining and sugar processing |
Cationic vs anionic polyelectrolyte: which do you need?
| Type | Charge | Best for | Typical uses |
|---|---|---|---|
| Cationic polyelectrolyte | Positive | Organic solids and biological sludge | Sludge dewatering at STPs and ETPs, DAF units, paper mill effluent, food processing effluent |
| Anionic polyelectrolyte | Negative | Inorganic and mineral solids | Raw water clarification, clarifiers after PAC or alum, mining and sand washing, sugar juice clarification, metal finishing effluent |
| Non-ionic flocculant | Neutral | Solids at low pH or where charge is not needed | Mineral processing and some acidic effluents |
| PolyDADMAC | Strongly positive (coagulant) | Colour and turbidity removal; reduces or replaces inorganic coagulants | Textile and dye effluent, paper, raw water, oily water |
| Polyamine | Positive (coagulant) | Turbidity and colour removal with less sludge | Raw water, paper and effluent treatment |
Within each type, products differ in charge density (how strongly charged) and molecular weight (chain length). Sludge from an aerobic STP usually needs a different grade from paper mill sludge or textile effluent. The quickest way to find the right one is a simple jar or sludge test with two or three grades.
How to prepare and dose polyelectrolyte powder
- Make a dilute stock solution, typically 0.1% to 0.5% strength, in clean water with a slow-speed stirrer. Add the powder slowly into the vortex so it does not form lumps.
- Let it mature (age) with gentle mixing before use, so the chains fully uncoil. Powders need longer than liquids.
- Dose after the coagulant, at a point with gentle mixing. Strong mixing breaks the flocs.
- Use fresh solution. Prepared solution loses strength over time, so make it in daily batches.
Avoid overdosing. Too much polyelectrolyte can re-stabilise particles, make sludge sticky, blind filter cloths and carry over into treated water. Start low and increase in small steps.
Where our polyelectrolytes are used
- Sewage treatment plants (STP)
- Effluent treatment plants (ETP) and CETPs
- Water treatment plants and clarifiers
- Sludge dewatering: filter press, belt press, screw press, centrifuge
- Paper and pulp
- Textile and dyeing
- Sugar and distilleries
- Mining, sand washing and ceramics
- Dairy and food processing
- Tanneries and metal finishing
Why buy polyelectrolyte from Zyax
- Full range in one place: cationic, anionic and non-ionic flocculants, plus organic and inorganic coagulants that work with them.
- Help choosing the grade: tell us your plant, sludge type and the dewatering machine you use, and we suggest which grades to trial.
- Powder, liquid or emulsion: pick the form that suits your dosing system, in bulk bags, cans or drums.
Polyelectrolyte Flocculants & Coagulants: product range
Each product line has its own page with uses, dosing guidance and FAQs.
- Cationic Polyelectrolyte
- Anionic Polyelectrolyte
- Non-Ionic Polyelectrolyte
- PolyDADMAC Coagulant
- Polyamine Coagulant
Frequently asked questions
What is polyelectrolyte used for in water treatment?
Polyelectrolyte is used to bind fine suspended particles into large flocs so they settle, float or filter out quickly. It is used in clarifiers, effluent and sewage plants, and for sludge thickening and dewatering.
What is the difference between cationic and anionic polyelectrolyte?
Cationic polyelectrolyte carries a positive charge and works best on organic and biological solids, so it is common for sludge dewatering. Anionic polyelectrolyte carries a negative charge and works best on inorganic and mineral solids, so it is common in raw water clarification after a coagulant.
Is polyelectrolyte a coagulant or a flocculant?
Polyacrylamide polyelectrolytes are flocculants: they gather already destabilised particles into big flocs. Coagulants such as PAC, alum or PolyDADMAC neutralise particle charge first. Most plants use a coagulant followed by a polyelectrolyte.
What concentration should polyelectrolyte solution be?
Polyelectrolyte powder is normally dissolved to a dilute solution of about 0.1% to 0.5% before dosing. The exact strength and dose depend on your plant and are best found with a jar or sludge test.
Why is my polyelectrolyte not working?
Common reasons are the wrong charge type or grade for the sludge, poor dissolution (lumps or fish-eyes), solution that has not matured or is too old, too much mixing after dosing, or overdosing. Tell us what you see and we can suggest what to change.
Do you supply polyelectrolyte in liquid form?
Yes. We supply polyelectrolytes as powder and as liquid or emulsion grades, which are easier to dissolve and suit automatic dosing systems.
What is the HSN code for polyelectrolyte?
Polyacrylamide-based polyelectrolytes in primary forms are generally classified under HSN heading 3906 (acrylic polymers). Confirm the exact code and GST rate on our invoice or with your tax adviser.
Which polyelectrolyte is used in an STP?
Most STPs use a cationic polyelectrolyte for sludge dewatering, because biological sludge is mostly organic. Some plants also use an anionic grade in the clarifier after a coagulant. The right grade depends on the sludge and the dewatering machine.
How should polyelectrolyte be stored?
Keep powder in a cool, dry place with the bag sealed, because it absorbs moisture and forms lumps. Prepared solutions should be used within the day. Spilled polyelectrolyte becomes very slippery when wet, so clean spills with dry absorbent first.
Get a quote for polyelectrolyte (cationic and anionic)
Tell us what you are treating and how much you use. Send your water or effluent analysis if you have one, and we will recommend the right product and pack size.
Related water treatment products

Poly Aluminium Chloride (PAC) & Alum
Fast-acting coagulants for drinking water, ETPs and STPs.

ETP & STP Chemicals and Bacteria Culture
Everything a sewage or effluent plant needs to meet discharge norms.

Defoamers & Antifoam Agents
Silicone and non-silicone defoamers for ETPs, STPs and process water.

Filter Media
Iron and manganese removal media, activated alumina, anthracite, quartz sand and gravel.
Recognized by Leading Industry Publications
