Deep Enhancer is a solvent-based, colour-enhancing, stain-proof impregnating treatment with a matt finish for compact and ultra-compact surfaces. It revives and deepens the natural colour of the material and gives water and stain protection without forming a surface film.
Suitable for marble, granite, limestone, travertine, slate, basaltina and lava stone, resin-marble and resin-quartz agglomerates, glazed, honed, natural and structured porcelain tiles, glazed and craquelé ceramic, and klinker.
How to use
Clean the surface thoroughly to remove all dust, dirt, and residue, and make sure it is completely dry. Apply an even coat with a brush, roller, or cloth. After 5 to 10 minutes, redistribute any excess, then remove residue at 20 to 30 minutes, or 45 to 60 minutes for a deeper finish, using a floor polisher or a hand tool. Removing all residue is important, as product left on the surface can leave a greasy film. The surface is dry within 1 to 2 hours and ready for normal use after 4 to 6 hours.
Coverage: 20 to 30 sq.m per litre, applied undiluted
Form: clear solvent-based liquid, specific gravity 0.81
Finish: matt, non-filming
The product has a flash point below 21°C and is highly flammable. Keep away from heat, sparks, and open flame, ensure good ventilation during use, and wear suitable gloves and eye protection.
