Faber 30 is a concentrated alkaline cleaner for heavy-duty cleaning of stubborn dirt on all hard surfaces. It cuts through grease and ingrained dirt quickly while staying gentle on the surface, and it is effective on tyre marks and for the deep cleaning of high-traffic areas. It can also strip old wax and resin finishes.
Suitable for marble, granite, slate, limestone, concrete, ceramic and porcelain tiles, terracotta, travertine, PVC, epoxy and polyurethane resins, and many stone agglomerates, indoors and outdoors.
How to use
Sweep or vacuum loose debris first. Dilute to suit the job: undiluted to strip wax or resin, 1:2 for strong degreasing of heavy residue, and 1:6 for routine floor cleaning. Apply the solution, leave it to act for about 10 to 15 minutes, then work it with a brush or machine, add water to form an emulsion, remove the excess, and rinse thoroughly with clean water.
Dilution: undiluted, 1:2, or 1:6 depending on the job
Coverage: about 8 to 10 sq.m per litre at use dilution
Form: amber liquid, alkaline, pH 11
Do not apply to wet or overheated surfaces, do not mix with other chemicals, protect adjacent untreated surfaces, and test on a small hidden area first.
Explore more Faber Tile & Stone Care products, including the gentler Mild Stone Cleaner Plus for routine stone cleaning.
Frequently asked questions
What is Faber 30 used for? Faber 30 is a concentrated alkaline cleaner for heavy-duty cleaning of stubborn dirt on all hard surfaces. It cuts through grease and ingrained dirt, is effective on tyre marks, and can strip old wax and resin finishes.
How is Faber 30 diluted? Undiluted to strip wax or resin, 1:2 for strong degreasing of heavy residue, and 1:6 for routine floor cleaning.
What surfaces is Faber 30 suitable for? Marble, granite, slate, limestone, concrete, ceramic and porcelain tiles, terracotta, travertine, PVC, epoxy and polyurethane resins, and many stone agglomerates, indoors and outdoors.
